1, the installation place need to maintain good ventilation should be sufficient generator inlet end , diesel outlet end should be good . Vent area should be more than 1.5 times greater than the area of the tank .
2 , around the installation site should be kept clean to avoid placing near the produce acidic, alkaline and other corrosive gases and vapors items. Conditional fire extinguishing devices should be configured .
3 , if used indoors , the exhaust pipe must pass to the outside , must be ≥ diameter of the smoke pipe diameter , the pipe connected to the elbow should not more than three , in order to ensure the smooth flow of smoke , and should the pipe to tilted 5 - 10 degrees , to avoid the rain injected ; If the exhaust pipe is installed vertically upwards , you must install a rain cover .
4, using the concrete foundation , with the level at the time of installation must be gauged their level of degree , and the unit is fixed to the base level of the . Between the base unit and should have special shock pad or by foot bolts.
5 , the unit must have a reliable protection shell grounded on the need for the generator neutral grounding , it must be neutral ground by professionals and equipped with lightning protection devices , prohibited the use of mains neutral grounding device point directly to ground.
6 , generator and mains bidirectional switch must be very reliable, prevent down transmission. Two-way switch wiring reliability test approved subject to the local electricity sector .
7 , wiring starter battery must be secure.